Nether Hub Redesign April 2016 Plan

From This Land Wiki
Revision as of 14:04, 12 April 2016 by Cassolotl (Talk | contribs) (Getting the tunnels started: Instructions for adding portals to the new nether network)

Jump to: navigation, search

Starting out with a rough outline...

Link for reference: Radical Nether Hub Redesign Proposal April 2016‎

--Cassolotl, Admin (talk) pronouns: they/them 13:07, 12 April 2016 (UTC)

The Plot

Move things to the "done" section at the end as they are completed.

Making the New Hub room

Dig down from a point near x=0, z=0 in the current Nether Hub, down to y=8. (It should only be 5 blocks down.)

Dig to Zero Zero. Mark the spot 0, 0 and dig a room 20 blocks in all directions centred on 0, 0 - so 40 x 40 total. Make it 4 blocks high.

  • This will need lots of pickaxes - anyone up for repairing diamond tools or providing a lot of iron?
  • This may also benefit from a lot of fire resistance potion for occasional dangerous lava pockets - anyone up for some brewing?

Add the frame of the Zero Zero nether portal using 12 obsidian blocks, against the zero zero point, on the south side.

  • This is hard to describe but Zero Zero is a point between four blocks rather than a block on its own. So the portal can't be dead centre. The mock-up puts the portal facing north/south, and I think it's built on the south side of the zero zero point - putting 19 blocks between the portal and the south wall, and 20 between the portal and the north wall.

Pave the entire 40 x 40 room with smooth stone slabs.

  • That's 1,600 smooth stone slabs, or 25 stacks.
    • That'll require 800 smooth stone blocks to craft, or 12.5 stacks.

Make the vertical tunnel between Old Hub and New Hub accessible and easy somehow. Maybe move it to one of the walls that won't get knocked down?

Get some crafting tables and ovens up in here for convenience somehow.

Getting the tunnels started

File:Newhub diagonal tunnels.png
A picture showing the size of the diagonal tunnels
The new network layout
Dig out 10 blocks or so of each of the 8 paths and label them with direction signs.
  • North, South, East and West are centred on the relevant 0 co-ordinate, and each are 4 blocks wide.
  • For the diagonal roads, copy the mock-up design (picture to the right incoming).

Anyone who likes a lot of digging can extend and/or pave these tunnels.

  • Paving is builders' and residents' choice.
  • Lengths of road we need are:
    • North: 200 blocks, ie: to x=0, z=-200.
    • South: 900 blocks, ie: to x=0, z=900.
    • East: 200 blocks, ie: to x=200, z=0.
    • West: 500 blocks, ie: to x=-500, z=0.
    • North-east: to x=200, z=-200.
    • South-east: to x=300, z=300.
    • South-west: to x=-400, z=400.
    • North-west: to x=-250, z=-250.

Connecting up everyone's portals

Using Jay's spreadsheet and the co-ordinates of your topside or netherside portal, feel free to add or move a portal to the new lower network.

  1. If you haven't already, build your topside portal and light it. Do not walk through.
  2. Stand right next to it and make a note of your x and z co-ordinates.
  3. Go to Jay's spreadsheet.
  4. File > Make a copy.
  5. Answer the question "what information do you already have?" by telling it whether you have your topside or netherside portal co-ordinates.
  6. Select "I'm digging from the main road to my portal".
  7. Enter your co-ordinates. The spreadsheet will tell you which colour road to walk down.
  8. In Minecraft, make it show the debug screen so you can see your avatar's co-ordinates.
    • On a Mac that's Fn+F3 on your keyboard.
  1. Head to the new y=8.5 nether hub.
  2. Walk down the road of the colour the spreadsheet told you, and stop walking when you get to the co-ordinates that the spreadsheet calls "Start at these co-ordinates on the road:"
  3. Dig in the direction it tells you. Make your path 2 blocks wide and 4 blocks high, and then pave it with the slab of your choice. This will prevent mob spawns and allow horses to be ridden down the road, with minimal digging.
  4. If you already have your portal built at y=8 netherside, you should run into it.
  5. If you haven't already built your netherside portal, stop digging when you get to the co-ordinates that the spreadsheet calls "Your nether-side portal needs to be at:"
  6. Build your portal, light it, and step through. You should end up at your topside portal.
  7. When you head back through to the Nether, you might end up at your old portal in the old nether network at y=13.5. It's safe to dismantle your old portal now.
    • If you end up at an unexpected or unfamiliar portal, make a note of your x y z co-ordinates and any signs and landmarks in the area, and then ask for help in the Telegram Chatter group or on this page's talk page.

Done things

Cut and paste tasks over to this section when they're done, and feel free to sign with four tildes if you want.